Each axis runs 0 to 100 clockwise. At any point in the triangle you represent a location 0 to 100 for any given axis. Remember that the axis are rotated relative to each other by 66 degrees, not the normal 90.
Edit: For example the top vertex represents 100 on the clay line but 0 for loam and silt. Whereas the top left corner of clay loam represents values of 40 clay, 45 sand and 15 silt
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Each axis runs 0 to 100 clockwise. At any point in the triangle you represent a location 0 to 100 for any given axis. Remember that the axis are rotated relative to each other by 66 degrees, not the normal 90.
Edit: For example the top vertex represents 100 on the clay line but 0 for loam and silt. Whereas the top left corner of clay loam represents values of 40 clay, 45 sand and 15 silt
Thank you. I was reading from the wrong direction so I was getting 80/90/10 instead of 80/10/10.